Raymarine forum / Raymarine Forums / Multifunction Displays v / Upgrading MFD to C95

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Upgrading MFD to C95
04-26-16, 01:11 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Upgrading MFD to C95
Welcome to the Raymarine Forum Phil,

Please click here to view a FAQ addressing this subject. In this case, a SeaTalk to SeaTalkng Converter would be used to interface the ST60 Instruments and Raystar 125 GPS Sensor to the a/c/e/eS/gS-Series MFD. The Power/NMEA 0183/Video Input Cable of the a/c/e/eS/gS-Series MFDs may be used to interface it to devices having a NMEA 0183 interface. It is correspondingly recommended that the Ray55 be interfaced via NMEA 0183 communications protocol to this cable.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Upgrading MFD to C95 - saustop - 04-25-16, 03:42 PM
RE: Upgrading MFD to C95 - Chuck - Raymarine - Moderator - 04-26-16 01:11 PM
RE: Upgrading MFD to C95 - saustop - 04-26-16, 02:19 PM
RE: Upgrading MFD to C95 - saustop - 04-27-16, 09:43 AM
RE: Upgrading MFD to C95 - saustop - 04-27-16, 03:08 PM
RE: Upgrading MFD to C95 - saustop - 05-03-16, 11:12 AM
RE: Upgrading MFD to C95 - saustop - 05-04-16, 07:50 AM
RE: Upgrading MFD to C95 - saustop - 05-16-16, 09:38 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication