Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Upgrading MFD to C95
04-26-16, 08:43 PM
Post: #4
RE: Upgrading MFD to C95
Phil,

Q1. Can the power from the C95 via the white Seatalkng connection, power the seatalk-seatlkng convertor avoiding a switched power cable directly to the convertor?
A1. Negative. Raymarine's MFDs are neither designed to supply power to nor to be powered from a SeaTalkng/NMEA 2000 backbone.

Q2. Everything I've read indicates that the RS125 GPS must be the only device connected to the center yellow seatalk socket in the convert.
A2. This is incorrect. Please click here to view a FAQ addressing this subject.

Q3. In this design both the ST60 tridata and the RS125 GPS are connected to a seatalk junction box. The seatalk junction box is then connected to the center yellow seatalk socket in the converter. Is this correct?
A3. This is indeed correct.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Upgrading MFD to C95 - saustop - 04-25-16, 03:42 PM
RE: Upgrading MFD to C95 - saustop - 04-26-16, 02:19 PM
RE: Upgrading MFD to C95 - Chuck - Raymarine - Moderator - 04-26-16 08:43 PM
RE: Upgrading MFD to C95 - saustop - 04-27-16, 09:43 AM
RE: Upgrading MFD to C95 - saustop - 04-27-16, 03:08 PM
RE: Upgrading MFD to C95 - saustop - 05-03-16, 11:12 AM
RE: Upgrading MFD to C95 - saustop - 05-04-16, 07:50 AM
RE: Upgrading MFD to C95 - saustop - 05-16-16, 09:38 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)