The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Issues with connecting to cp470
08-14-18, 10:08 AM (This post was last modified: 08-14-18 12:49 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Issues with connecting to cp470
Recently my c125 quit communicating with my cp470. My mfd shows the cp470 when you look under the menu to connect it and it also shows my airmar r111 that is connected to the cp470. Although when you are on the depth finder screen it does not pick up anything. It is solid blue. You can not hear the chirp running anymore, which before I could. I have had the r111 chirp module tested however they said it works fine. My cp470 is showing a single flashing green light. One flash every few seconds, so it is showing to be operating normally. And last but not least the ping is enabled under the depth finder menu and it seems to be on the correct channel "which is the only channel". These are all brand new units also.

Much Appreciation,
Chad
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Issues with connecting to cp470 - Suncoast_Fishing - 08-14-18 10:08 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)