[DG] [DG11] Depth issue

[Derek - Raymarine - Moderator]

Hi Sailingjeff,

As mentioned in the previous reply to your enquiry, try replacing the batteries, then feeding the 12v connected to the hull transmitter to the red wire of the DST transducer as well and if neither works send the DST800 to the Raymarine service centre.

If you replace the batteries, this will not affect the system credentials and no need to pair the hull transmitter back to the network onboard.

If you fitted a smart DST800 into the STng network, depth will be displayed on the AXIOM, but note that you would also need an i70s to be able to calibrate the Smart DST800, since this cannot be done through the AXIOM.

Thanks
Derek