[CA] [CA11] Choosing transducer for Axiom. Fishing Oregon
|
10-16-19, 12:53 PM
Post: #6
|
|||
|
|||
RE: [CA11] Choosing transducer for Axiom. Fishing Oregon
lukerabun,
Q1. Is the RV-100 also a chirp traditional sonar or does the Chirp only apply to the down, side, and RealVision modes? A1. Yes. The RV-100 transducer supports RealVision, DownVision, SideVision, and low power / high frequency CHIRP conical sonar imaging. You may select to display any one of the above types of imagining or all for within independent fishfinder sonar application pane. Q2. I'm leaning towards the M260 but I noticed it's not a Chirp transducer. Is Chirp something that will give more definition in regards to locating fish and bottom composition, what is the Chirp advantage? A2. The quality of imaging is dependent upon the species of fish and the frequency used to sound. While CHIRP transducers can potentially detect more species, the time proven 50kHz/200kHz frequencies are generally considered best for tuna. Q3. Based on the MFD selection ( 2 Axiom pros and one Axiom 9) and fishing environment what would be the top of the line? What would a pro fisherman use in this case? A3. Professional fishermen would typically select Axiom Pro MFDs because of their hybridTouch interfaces rather than rely upon touchscreens. They would also be recommended to select external fishfinder sounder modules rather than MFDs having embedded sonar circuitry for maximum sonar performance. Accordingly, Axiom Pro S MFDs and a RVX-1000 would be recommended. Should you ever desire to dabble in high power CHIRP sonar, the M260 may simply be removed from its reservoir and replaced with a M265 CHIRP transducer. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)