[CA] [CA11] e165 cable selections

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Kevin,

Q1. my concern about the final, installed orientation of the Combined Power and data cable, Right-angled (R70029)
A1. When plugged into the display's socket, the cable of the right angled power/NMEA 0183/video input cable will be oriented toward the bottom of the MFD.

Q2. On page 52 & 53 of the above-referenced document, Chapter 4.20 Video in-out connection, a part number (R70003) is given for e9 & e12 MFDs, however, even though the e165 has a dedicated Video In/Out (e Series) connector and those capabilities, it seems to have been specifically excluded in the table at the bottom of the left column of page 53 ... is this some kind of documentation transposition error, or ?
A2. While not specified, the R70003 e-Series Accessory Video Cable is applicable to all 9", 12", and 16" e-Series MFDs.