Raymarine forum / Raymarine Forums / Product Selection Assistance v / Axiom Transducer Selection

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axiom Transducer Selection
03-22-17, 12:31 PM (This post was last modified: 03-22-17 01:53 PM by Chuck - Raymarine - Moderator.)
Post: #5
a7ewizard Offline
Junior Member
**
 		Posts: 11
Joined: Mar 2017
Reputation: 0
RE: Axiom Transducer Selection
This thread is also of interest to me......
I have a one inch diameter through hull water pick-up that I could remove for placement of an RV-220 transducer. You are stating that the RV-220 needs about a 2 3/8 [censored] for mounting. Are these transducers available now and has this [censored] size changed?

Will these transducers show bottom at planning speeds? I am a bit confused by your earlier suggestion for the OP to retain the B60. I have 2 Raymarine displays mounted side by side. An older A50d with a traditional transom transducer and an A78 with a chirp/downvision transom transducer. The A78 doesn't show bottom nearly as well when planning. Is this a characteristic of chirp sonars??
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Axiom Transducer Selection - JPA - 03-18-17, 07:08 PM
RE: Axiom Transducer Selection - JPA - 03-21-17, 03:50 PM
RE: Axiom Transducer Selection - a7ewizard - 03-22-17 12:31 PM
RE: Axiom Transducer Selection - 2flit - 08-26-17, 07:10 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication