Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Intagration of the ClearCruise System

Post Reply 
 
Thread Rating:
  • 2 Vote(s) - 2.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Intagration of the ClearCruise System
12-06-19, 04:30 PM (This post was last modified: 12-06-19 04:51 PM by Chuck - Raymarine - Moderator.)
Post: #10
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Intagration of the ClearCruise System
Jeff,

Q. However, for heading, the NG converter does not show up, as it did previous to me installing the AR-200.
A. I understand this ... I want to know whether Heading data items are being populated per my prior response and if not to rewire/ re-position the ST8002 in the manner specified to determine whether it reports heading. I additionally inferred to that the software level of the Raymarine products which have been interfaced as spurs to the STng backbone should be inspected to determine their software levels and to update them with the latest available Raymarine product software updates if not operating with the latest software.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Intagration of the ClearCruise System - Chuck - Raymarine - Moderator - 12-06-19 04:30 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication