[CA] [CA11] Intagration of the ClearCruise System

[Chuck - Raymarine - Moderator]

Jeff,

If following the recommendations within my previous response, then the following corrections need to be implemented within the diagram:

- The SeaTalk cable connection from the ST60 Tridata to the SPX30's SeaTalk port should be eliminated.

- The p70 should be disconnected from the D244 SeaTalk Junction Block

- The p70 should be connected to a spur socket within the system's SeaTalkng/NMEA 2000 backbone.

- The SeaTalkng port of the SPX30 should be connected to a spur socket within the system's SeaTalkng/NMEA 2000 backbone.

- Finally, care should be taken to ensure that the SPX30 and p70 are both operating with the latest software. When interfaced in the recommended manner, the software of the p70 may be updated by the Data Master Axiom MFD. The p70 may also be used to determine the version of software which is installed within SPX30. While the software of the p70 may be updated via an Axiom MFD, the software of the SPX30 may not. Please click here to view a FAQ addressing alternative options for updating the software within the SPX30.