Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Swapping out (2) E95's for (2) Axiom 12's?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Swapping out (2) E95's for (2) Axiom 12's?
01-16-20, 10:58 AM (This post was last modified: 01-16-20 11:21 AM by Chuck - Raymarine - Moderator.)
Post: #5
Grady330 Offline
Junior Member
**
 		Posts: 16
Joined: Jun 2017
Reputation: 0
RE: [CA11] Swapping out (2) E95's for (2) Axiom 12's?
Right now there is no switch in my current network and my current CP370 and my HD radar plug into a 5 way connector. Nothing plugs directly into the MFD's themselves. The MFD's also plug into the 5 way connector. The MFD's are connected together with a raynet cable. So what your are saying is I can't simply use the Device net adapter on the Axiom's to adapt to the current cables that plug into the E95 and E97 and be done?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Swapping out (2) E95's for (2) Axiom 12's? - Grady330 - 01-16-20 10:58 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication