The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] axiom 12 rv

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] axiom 12 rv
01-17-20, 08:46 AM (This post was last modified: 01-22-20 11:22 AM by Chuck - Raymarine - Moderator.)
Post: #1
marcot Offline
Junior Member
**
 		Posts: 4
Joined: Jan 2020
Reputation: 0
[CA11] axiom 12 rv
My present network consists of 1 E120mfd (legacy mfd)+ 1 E80mfd + various st 60+ S3G smartpilot . all these are networked through seatalk hs network switch e55058.

I want to keep all these legacy products and adding an Axiom 12 rv.

reading other threads, I understand and please confirm:

1. autopilot can't be interfaced to Axiom
2. Axiom can be interfaced to other instruments st60/legacy E120 with A80160 RayNet (F) to SeaTalkhs (F) Adapter. in other words Axiom 12rv connects to existing legacy network using the network switch e55058.

3. the adapter A80160 has the following note: The E-classic requires a "crossover" in the SThs data line, so this cable can only be used when connecting to the HS-5 Network Switch.
4. question: which crossover?

comments or suggestions would be appreciated.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] axiom 12 rv - marcot - 01-17-20 08:46 AM
RE: [CA11] axiom 12 rv - marcot - 01-23-20, 08:01 AM
RE: [CA11] axiom 12 rv - marcot - 01-26-20, 02:39 AM
RE: [CA11] axiom 12 rv - marcot - 01-27-20, 11:10 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication