[CA] [CA11] RCR cable
|
02-11-20, 03:27 PM
(This post was last modified: 02-11-20 03:30 PM by Chuck - Raymarine - Moderator.)
Post: #5
|
|||
|
|||
RE: [CA11] RCR cable
Hi again.
One more thought on this; Would it make a difference if I cut the RCR cable and terminated the wires on a small terminal strip mounted inside the NavPod? This makes it possible to easily feed it up the tube and should provide a solid connection arrangement. Are the wires color coded inside the RCR cable, if not then this idea is non-starter? On the old Std Horizon chart plotter I'm replacing, the GPS antenna cable was terminated this way. The provided the plotter cable picked up those connections along with 12V power for the plotter, allowing one small cable to be fed up the binnacle tube. Kirk |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] RCR cable - Captain Kirk - 02-10-20, 03:57 PM
RE: [CA11] RCR cable - Chuck - Raymarine - Moderator - 02-10-20, 04:44 PM
RE: [CA11] RCR cable - Captain Kirk - 02-10-20, 10:31 PM
RE: [CA11] RCR cable - Chuck - Raymarine - Moderator - 02-11-20, 08:51 AM
RE: [CA11] RCR cable - Captain Kirk - 02-11-20 03:27 PM
RE: [CA11] RCR cable - Chuck - Raymarine - Moderator - 02-11-20, 03:40 PM
RE: [CA11] RCR cable - Captain Kirk - 02-11-20, 04:21 PM
RE: [CA11] RCR cable - Chuck - Raymarine - Moderator - 02-11-20, 04:33 PM
|
User(s) browsing this thread: 1 Guest(s)