[CA] [CA11] Closing the Gap with 1kw medium wide transducer?

[Fish On]

Chuck,
So with my R109LH already connected to the CP570, I can also add an additional 2kw thru hull transducer to the CP570? If this is true, that would be great! I won't have to purchase an additional CP570 as my Breaker box is full.
So either one of the two 2kw thru hull transducers that you recommended will work, and also connected to a single CP570 black box unit.
- A80378 PM411LM-W 2kW Ultra Wide CHIRP Transducer
- A80377 R409LM-W 2kW?
Next question's;
Can I run the two, 2kw transducers simultaneously at the same time? R109LH and R409LM-W 2kw?
How far apart do the 2kw transducers have to be?
How far does the RV212 have to be from the 2kw transducers.
Or, if it cant be done, heres another option, get a 1kw medium chirp transducer and plug it into the Axiom Pro RVX, as I have dual Axiom Pro 16 RVX.
My RV212 is connected to one of the Axiom Pro RVX, I can connect the 1kw medium transducer to the other Axiom Pro RVX.
I would just need a model number from you on a 1kw thru hull medium, or medium wide, or medium ultra wide chirp transducer.
Please advise,
Thanks!!