[CA11] i70 depth erratic from ITC-5

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] i70 depth erratic from ITC-5

03-02-20, 07:20 PM

Post: #3

jefndeb Offline

Mainship 400

Posts: 54
Joined: Feb 2016
Reputation: 0

RE: [CA11] i70 depth erratic from ITC-5

I checked the fluid in the P79, it had some fluid in there but I removed it and applied 2.4 oz. of fresh glycol fluid as the instructions specify...this didn't correct the issue...the depth seemed to go back to 2.2 feet every 10 seconds or so..

I did, while underway, try to adjust settings on the B744 transducer thinking it may be interfering. no effect.

I was wondering, since this data is going to the ITC-5, maybe it is suspect?

Think I can install a ST60 depth and wire the P79 directly to it and use that as a tool to diagnose?

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] i70 depth erratic from ITC-5 - jefndeb - 02-16-20, 06:21 PM

RE: [CA11] i70 depth erratic from ITC-5 - Chuck - Raymarine - Moderator - 02-19-20, 03:56 PM

RE: [CA11] i70 depth erratic from ITC-5 - jefndeb - 03-02-20 07:20 PM

RE: [CA11] i70 depth erratic from ITC-5 - Chuck - Raymarine - Moderator - 03-03-20, 03:39 PM

RE: [CA11] i70 depth erratic from ITC-5 - jefndeb - 03-22-20, 09:50 PM

RE: [CA11] i70 depth erratic from ITC-5 - Chuck - Raymarine - Moderator - 03-23-20, 07:40 AM

RE: [CA11] i70 depth erratic from ITC-5 - jefndeb - 03-23-20, 08:49 PM

RE: [CA11] i70 depth erratic from ITC-5 - Chuck - Raymarine - Moderator - 03-24-20, 08:58 AM

RE: [CA11] i70 depth erratic from ITC-5 - jefndeb - 03-27-20, 11:30 AM

RE: [CA11] i70 depth erratic from ITC-5 - Chuck - Raymarine - Moderator - 03-27-20, 01:34 PM

User(s) browsing this thread: 1 Guest(s)