[CA] [CA11] AirMar Ultrasonic Temp/depth wiring
|
02-24-20, 09:10 PM
(This post was last modified: 02-25-20 10:15 AM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] AirMar Ultrasonic Temp/depth wiring
My current system includes i70 displays, E75 multifunction, st60wind, p70autopilot and legacy st80 multifuntion displays connected through st/nt adapter.
Everything works great. I would like to replace my paddlewheel airmar speed/temp with their newer ultrasonic Multilog Sensor which has an NMEA 2000 output model. Current speed/temp and depth sensors connect through old st80 pod. The sensor housings should be compatible. Question is should I wire new sensors to st80pod or wire direct to my new style backbone ? also, will I need an adapter to connect and will the st80 displays still be able to function without going through the pod. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] AirMar Ultrasonic Temp/depth wiring - riclevitt - 02-24-20 09:10 PM
RE: [CA11] AirMar Ultrasonic Temp/depth wiring - Chuck - Raymarine - Moderator - 02-25-20, 10:34 AM
|
User(s) browsing this thread: 3 Guest(s)