Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Autopilot switches to Stand By without warning

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Autopilot switches to Stand By without warning
03-04-20, 02:13 PM (This post was last modified: 03-04-20 02:16 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Autopilot switches to Stand By without warning
Welcome to the Raymarine Forum Paul,

Please note that while an ACU may be interfaced to a ST6xxx autopilot control head, an ACU must be interfaced to a p70S/p70RS/p70/p70R autopilot control head or Axiom/Axiom Pro/Axiom XL MFD, as well as to an EV-1 CCU. Has the ACU200 onboard your vessel additionally been interfaced to these item? If so, please specify the specific models of these products. What versions of software are installed within the MFD, EV-1 CCU, ACU, and p70S/p70RS/p70/p70R? Please additionally specify how the ST6xxx autopilot control head has been interfaced to the system.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Autopilot switches to Stand By without warning - Chuck - Raymarine - Moderator - 03-04-20 02:13 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication