Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] A57D - shows "no pilot"
06-01-20, 11:20 PM
Post: #2
RE: [TG11] A57D - shows "no pilot"
Hello Dmitry,

The A50/57/70 didn't have as complete autopilot integration (control) of some of the larger or newer displays, but you should still be able to send navigation data to the pilot. Your connection diagram is fine, it's very good.

To check whether the A57 really is able to communicate with the autopilot, you can do one of two things:
  1. Look in Menu > System Diagnostics > External Interfaces > SeatalkNG > Devices and see whether the SPX pilot is listed
  2. Do a Goto Waypoint on the A57 and then press Track on the pilot and see whether the pilot can steer to the waypoint

If either of these work then your connection is good.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] A57D - shows "no pilot" - Tom - Raymarine - Moderator - 06-01-20 11:20 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)