Raymarine forum / Raymarine Forums / Multifunction Displays v / e127 and ST60 Autopilot

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
e127 and ST60 Autopilot
08-26-16, 02:52 PM
Post: #10
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: e127 and ST60 Autopilot
Bruce,

I have a concern with your installation regarding the number of devices which are being powered by the ACU-200's SeaTalkng port. It is recommended that the ACU-200's SeaTalkng port power switch be configured OFF, and that the SeaTalkng backbone be powered from a switched 12VDC power circuit connected to a spur socket at the approximate midpoint of the backbone's LEN load. I also have a concern regarding the total length of the daisy chain of SeaTalkng devices ... what is the total length of SeaTalkng spur cable connecting the three devices shown within the daisy chain to the SeaTalkng backbone?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: e127 and ST60 Autopilot - Chuck - Raymarine - Moderator - 08-26-16 02:52 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication