Raymarine forum / Raymarine Forums / Fishfinders v / Dragonfly 5 DVS locks on thermocline instead of bottom

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dragonfly 5 DVS locks on thermocline instead of bottom
06-21-16, 10:49 AM (This post was last modified: 06-21-16 10:52 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Dragonfly 5 DVS locks on thermocline instead of bottom
Welcome to the Raymarine Forum levistic,

It appears that your Dragonfly display has not been updated with the latest available software which has been released to specifically address symptoms such as you have reported. Please click here to view a the Dragonfly software update web page where you may download the latest software and find instructions regarding how to update its software. Should the symptom re-appear following the software update, then the Fishfinder application's range may be manually adjusted the permit the bottom to be plotted ... the depth scale on the right hand side would be used to determine depth.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Dragonfly 5 DVS locks on thermocline instead of bottom - Chuck - Raymarine - Moderator - 06-21-16 10:49 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication