The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / E120 and Seatalk NG Alarm

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E120 and Seatalk NG Alarm
06-27-16, 10:59 AM
Post: #1
Miked Offline
Junior Member
**
 		Posts: 7
Joined: Apr 2016
Reputation: 0
E120 and Seatalk NG Alarm
I have a E120 (Classic) MFD interfaced to a Maretron Engine monitoring system (EMS100) using NMEA 2000/ SeaTalkNG. The E120 has SW Version 5.69. At low engine speeds while in gear, I get occasional Engine (SeaTalk) alarms on the E120. There is not an engine problem, might just be the oil pressure going below alarm limit threshold.
Is there a way to disable the Seatalk alarms on the E120?
I have set the SeaTalk Alarms to ‘OFF’ in the system menu, but the alarm described above still occur.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
E120 and Seatalk NG Alarm - Miked - 06-27-16 10:59 AM
RE: E120 and Seatalk NG Alarm - Miked - 06-27-16, 03:00 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication