E120 Classic MFD with DSM300
|
07-08-16, 03:16 PM
(This post was last modified: 07-08-16 03:22 PM by Chuck - Raymarine - Moderator.)
Post: #6
|
|||
|
|||
RE: E120 Classic MFD with DSM300
Finally got the depth info to the Databar - thanks for the help. One thing, however, has me a bit confused. The space on the bar above Local/System is black - no data. If I have the Databar loaded with info in the first four "blocks" - adding another item will not "push" previous items into the vacant spot. Instead, by adding the new item I lose an item previously installed, and the vacant spot stays black.
Any suggestions will be appreciated. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
E120 Classic MFD with DSM300 - seeray96 - 06-28-16, 10:17 AM
RE: E120 Classic MFD with DSM300 - Chuck - Raymarine - Moderator - 06-28-16, 10:51 AM
RE: E120 Classic MFD with DSM300 - seeray96 - 06-28-16, 02:42 PM
RE: E120 Classic MFD with DSM300 - seeray96 - 06-29-16, 08:30 AM
RE: E120 Classic MFD with DSM300 - Chuck - Raymarine - Moderator - 06-29-16, 11:05 AM
RE: E120 Classic MFD with DSM300 - Chuck - Raymarine - Moderator - 07-08-16, 03:29 PM
RE: E120 Classic MFD with DSM300 - seeray96 - 07-26-16, 01:39 PM
RE: E120 Classic MFD with DSM300 - Chuck - Raymarine - Moderator - 07-26-16, 04:35 PM
RE: E120 Classic MFD with DSM300 - seeray96 - 07-26-16, 06:17 PM
RE: E120 Classic MFD with DSM300 - Chuck - Raymarine - Moderator - 07-27-16, 10:06 AM
|
User(s) browsing this thread: 1 Guest(s)