Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Won't power up
07-29-16, 01:55 PM
Post: #2
RE: Won't power up
Welcome to the Raymarine Forum Telepyleia,

Please note that unlike other models of autopilot course computers, the X5 Autopilot Course Computer is not designed to supply power to the SeaTalk communicatons bus which supports communications between the various components and provides power to the ST60+ instruments, and possibly to the autopilot control head (model not specified). It is recommended that troubleshooting begin by ensuring that all of the vessel's power circuits have been switch ON. Should the problem persist, then the circuit supplying power to the SeaTalk bus will have to be traced to ensure that all connections are free of corrosion, tight, and that the bus has continuity to power (via its red lead) and ground via its shield lead. The SeaTalk bus should have been installed such that it's circuit was protected with a 5A fuse ... the fuse should be checked accordingly.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Won't power up - Telepyleia - 07-29-16, 01:37 PM
RE: Won't power up - Chuck - Raymarine - Moderator - 07-29-16 01:55 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us