The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / s1000 auto pilot conection to a128 MFD or upgrade

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
s1000 auto pilot conection to a128 MFD or upgrade
08-04-16, 02:55 PM
Post: #1
Doncloes Offline
Junior Member
**
 		Posts: 5
Joined: Apr 2016
Reputation: 0
s1000 auto pilot conection to a128 MFD or upgrade
Hi,
I recently installed a a128 MFD, with downvision sonar and also connected to previous install DSM 300, Also installed and connected by nema a RAY 70 VHF with AIS. I tried connecting my s1000 to the MFD by nema and the AIS started to go in and out of connection with the MFD. I did not see if the pilot connected because there was no vessel movement. The AIS and Pilot connection was made to the MFD in parallel, is that the correct way to connect? I really want a good working pilot. The s1000 with wireless remote would not work reliable, the CU would disconnect and the s100 would just go off sporadically.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
s1000 auto pilot conection to a128 MFD or upgrade - Doncloes - 08-04-16 02:55 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication