[CA] EV-1 mounting
|
08-30-16, 02:03 PM
(This post was last modified: 04-06-18 10:18 AM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
RE: [CA] EV-1 mounting
Welcome to the Raymarine Forum crosscr,
The mounting location which you have suggested would be atypical. Following installation of a radome or open array pedestal (the design of these devices includes an electric motor (i.e. source of magnetism)), it would almost certainly not be a suitable location for the EV-1 Sensor Core. It is recommended that a vertical bulkhead mounting site be located below decks which is at least three feet from ferrous materials, devices featuring magnets (pumps, motors, speakers), high current drawing devices and the cables feeding such devices. Sea Ray may be of some assistance in identifying a location to install the EV-1 Sensor Core. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA] EV-1 mounting - crosscr - 08-07-16, 04:14 PM
RE: [CA] EV-1 mounting - Chuck - Raymarine - Moderator - 08-30-16 02:03 PM
RE: [CA] EV-1 mounting - madifonzo78 - 04-06-18, 10:06 AM
RE: [CA] EV-1 mounting - Chuck - Raymarine - Moderator - 04-06-18, 10:42 AM
|
User(s) browsing this thread: 1 Guest(s)