Wireless T101 System - No Wind Displayed

[brboynton]

Hi,

I installed a T101 wireless wind system about a month ago and successfully auto-networked it with an existing RaceMaster. This provided me with AWA and AWS on the Analogue Display as well as apparent wind data on the RaceMaster.

This setup worked until I tried to introduce a hull transmitter for true wind (wired into my existing ST60 transducer) into the system.

Once the hull transmitter had a chance to charge, I re-ran the auto-network process, the new hull transmitter was found by the RaceMaster (the chosen display), everything seemed fine and as I was on a mooring I decided I would test the speed and true wind integration another day...

Upon my next return to the boat, the wind display would no longer display any wind data...wind display pages show "--" and cannot seem to find the wind transducer. When I enter the health pages on both the MN-100 wireless display or the RaceMaster, no wind transducer is found.

I removed the hull transmitter (physically and at a distance) from the system and re-ran the auto-networking process with no success.

Please provide any assistance possible to try and remedy this situation as the next step is a trip up the mast to remove the wireless wind transducer.

Thanks

Blane Boynton
see ticket #182349 opened with Raymarine support