Data Source Selection
|
10-03-16, 09:57 AM
Post: #2
|
|||
|
|||
RE: Data Source Selection
Welcome to the Raymarine Forum tpbradysr,
No source selection is required for the action which you have suggested. When a third party MFD/chartplotter has been interfaced to a SeaTalkng / NMEA 2000 backbone to which an Evolution autopilot has also been interfaced, and the MFD/chartplotter has been commanded to Go To Cursor / Waypoint or Follow a Route, then the autopilot may be commanded into Track Mode via the p70/p70R Autopilot Control Head which has been interfaced to the system and the Evolution autopilot will use the navigational data supplied by the third party MFD/chartplotter. If MFDs or chartplotters from more than one manufacturer have been interfaced to the SeaTalkng / NMEA 2000 backbone, then care should be taken to ensure that only one MFD or chartplotter has been commanded to Go To Cursor / Waypoint or Follow a Route. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Data Source Selection - tpbradysr@gmail.com - 09-29-16, 06:14 PM
RE: Data Source Selection - Chuck - Raymarine - Moderator - 10-03-16 09:57 AM
RE: Data Source Selection - tpbradysr@gmail.com - 10-14-16, 12:49 AM
RE: Data Source Selection - Chuck - Raymarine - Moderator - 10-14-16, 08:22 AM
RE: Data Source Selection - tpbradysr@gmail.com - 10-14-16, 01:31 PM
RE: Data Source Selection - Chuck - Raymarine - Moderator - 10-14-16, 02:55 PM
|
User(s) browsing this thread: 1 Guest(s)