SeaTalk device connections to e95 MFD

[Bill Kneller]

I had the same question on the converter on the old forum. The manual shipped with it is outdated. Here is a link to the current manual

On This Software Update Page of the Raymarine Website

With the introduction of version 1.10, the converter now supports a system with a Autopilot. With version 1.11 you are now able to connect and communicate with a previous generation of Autopilot such as the S1G, S2G and S3G as examples. Information in the manual regarding not being able to connect the converter with a Autopilot in the system is now redundant.

I run an e97 and e125 with an S1G using the E22158 converter and it works well. The pilot is the only thing left on Seatalk 1. I have an RD418D radome that used to connect to a C90W that is now an e125 and it works great. If you go with an e95 you probably don't need the RS125. I kept the RS125 installed but unplugged from Seatalk as a 3rd GPS if the e97 and e125 should both fail.