A68 (replaced A67) and older thru hull transducer

[Cp111]

(10-20-16 01:32 PM)Chuck - Raymarine - Moderator Wrote:  Welcome to the Raymarine Forum Chris,

Thank you. And thank you for the timely and informative reply.

(10-20-16 01:32 PM)Chuck - Raymarine - Moderator Wrote:  Please click here to view a FAQ addressing this subject.

Wish I would have seen this before.

(10-20-16 01:32 PM)Chuck - Raymarine - Moderator Wrote:  I would recommend that a CP370 be installed

Looks like a good solution but expensive. At some point when I next haul the boat (hopefully at least a year), I may consider installing a chirp transducer, but I am thinking the i40 will suit my needs in the meantime.

(10-20-16 01:32 PM)Chuck - Raymarine - Moderator Wrote:  Alternatively, an i40 Bidata Instrument display (display-only) or i50 Tridata instrument display (display-only) may be installed onboard.

I've ordered an i40 depth. I assume this works too (you mention the bi and tri data not the solo depth). And thank you for the faq link for wiring that. That looks relatively easy.

Thanks again for your help. I will let you know if I have any success. (or more questions ;))

Regards,
Chris