Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Autopilot repair
11-09-16, 04:14 PM (This post was last modified: 11-09-16 05:00 PM by Chuck - Raymarine - Moderator.)
Post: #4
RE: Autopilot repair
Bajanfisherman,

In order to use a ST6002 with an Evolution autopilot, all of the following conditions must exist:
- the SeaTalk to SeaTalkng Converter must be updated with v1.21 or later SeaTalk to SeaTalkng Converter software
- a p70/p70R Autopilot Control Head (updated with the latest available software) or a/c/e/eS/gS-Series MFD (updated with the latest available software and the MFD's Autopilot Controls feature must be configured to ON) ... the Dockside Wizard must be performed via a p70/p70R or a/c/e/eS/gS-Series MFD.
- the ACU and EV-1 Sensor Core must be updated with the latest available software

Unfortunately, product repair information is not available to this Forum. Please click here to view Raymarine's web page where you may request information concerning the status of your product's repair.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Autopilot repair - Bajanfisherman - 11-01-16, 07:36 PM
RE: Autopilot repair - Bajanfisherman - 11-06-16, 03:16 AM
RE: Autopilot repair - Chuck - Raymarine - Moderator - 11-09-16 04:14 PM
RE: Autopilot repair - Bajanfisherman - 11-09-16, 04:48 PM
RE: Autopilot repair - Bajanfisherman - 11-14-16, 08:53 AM
RE: Autopilot repair - Bajanfisherman - 11-15-16, 12:00 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)