The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / tranducer interface

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
tranducer interface
11-09-16, 09:09 PM (This post was last modified: 11-10-16 02:58 PM by farwest217.)
Post: #1
farwest217 Offline
Junior Member
**
 		Posts: 3
Joined: Oct 2016
Reputation: 0
tranducer interface
I have an e125, a CP450C, and a M265LH transducer. The transducer has no plug, just a bare cable. I have been told there is a converter that will allow me to to wire the transducer to connect to the CP450C but I cant seem to locate the part number and / or specifications.

Can you confirm that such a converter exists, part number etc? thank you
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
tranducer interface - farwest217 - 11-09-16 09:09 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication