ST60+ with C120/80 Classic MFD adding DSM250

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

ST60+ with C120/80 Classic MFD adding DSM250

12-12-16, 04:06 PM (This post was last modified: 12-13-16 10:57 AM by Chuck - Raymarine - Moderator.)

Post: #2

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: ST60+ with C120/80 Classic MFD adding DSM250

Welcome to the Raymarine Forum Tom,

It is not possible to do as you have suggested. Please click here to view a FAQ addressing the subject of using an instrument transducer to support a MFD's fishfinder features. Please click here to view a FAQ addressing the subject of how to add fishfinder features to a C-Series Classic MFD. When not interfaced to a Depth transducer and configured as a Depth repeater, the ST60 Depth/Tridata Instrument will repeat depth data transmitted to a SeaTalk bus by a MFD.

« Next Oldest | Next Newest »

Messages In This Thread

ST60+ with C120/80 Classic MFD adding DSM250 - tbharty - 12-12-16, 01:00 AM

RE: ST60+ with C120/80 Classic MFD adding DSM250 - Chuck - Raymarine - Moderator - 12-12-16 04:06 PM

RE: ST60+ with C120/80 Classic MFD adding DSM250 - tbharty - 12-13-16, 01:14 AM

RE: ST60+ with C120/80 Classic MFD adding DSM250 - Chuck - Raymarine - Moderator - 12-13-16, 10:56 AM

RE: ST60+ with C120/80 Classic MFD adding DSM250 - tbharty - 12-13-16, 11:58 AM

RE: ST60+ with C120/80 Classic MFD adding DSM250 - Chuck - Raymarine - Moderator - 12-13-16, 02:14 PM

User(s) browsing this thread: 1 Guest(s)