Raymarine forum / Raymarine Forums / Fishfinders v / CP470 and Airmar TM265LH

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CP470 and Airmar TM265LH
01-03-17, 11:25 AM
Post: #11
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: CP470 and Airmar TM265LH
mburazor,

The suggested combination of B265LM and B175H CHIRP transducers is not recommended and is supported by the CP470 and CP570. Transducers like the A80050 B175H were originally designed to be installed in pairs (ex. B175H & B175M, B175H & B175L, etc.) using the Paired CHIRP Transducer Y-Cable (A102146) or when installed alone with a single transducer using the Single Operation Cable (A80328). The CP470 and CP570 are designed to sense the IDs of two interfaced transducers. Installation of the two transducers which you have specified would present the CP470 or CP570 with three sense IDs and a sense resistance not conforming to any supported transducers which have been designed to be installed as pairs.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
CP470 and Airmar TM265LH - mburazor - 12-23-16, 04:52 PM
RE: CP470 and Airmar TM265LH - mburazor - 12-23-16, 07:01 PM
RE: CP470 and Airmar TM265LH - mburazor - 12-24-16, 10:48 AM
RE: CP470 and Airmar TM265LH - mburazor - 12-27-16, 02:10 PM
RE: CP470 and Airmar TM265LH - mburazor - 12-30-16, 07:24 PM
RE: CP470 and Airmar TM265LH - mburazor - 12-31-16, 02:42 PM
RE: CP470 and Airmar TM265LH - Chuck - Raymarine - Moderator - 01-03-17 11:25 AM
RE: CP470 and Airmar TM265LH - mburazor - 01-04-17, 10:09 AM
RE: CP470 and Airmar TM265LH - mburazor - 01-05-17, 08:47 AM
RE: CP470 and Airmar TM265LH - mburazor - 01-05-17, 02:29 PM
RE: CP470 and Airmar TM265LH - mburazor - 01-05-17, 07:51 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication