Raymarine forum / Raymarine Forums / Multifunction Displays v / E120 / AIS Problem

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E120 / AIS Problem
02-13-17, 03:29 PM (This post was last modified: 02-13-17 03:33 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: E120 / AIS Problem
Welcome to the Raymarine Forum Tom,

Please click here to view a FAQ addressing this subject. In this case, it is additionally recommended that the BAUD rate of the AIS receiver/transceiver be verified to be 38400 BAUD. Please additionally note that the Brookhouse MUX is typically used as a data bridge between SeaTalk and NMEA 0183. It should be noted that SeaTalk communications protocol does not support AIS data communications. Per the FAQ referenced above, the AIS transceiver must be interfaced to the MFD's NMEA 0183 port.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
E120 / AIS Problem - TomHalfmoon - 02-12-17, 07:56 PM
RE: E120 / AIS Problem - Chuck - Raymarine - Moderator - 02-13-17 03:29 PM
RE: E120 / AIS Problem - TomHalfmoon - 02-14-17, 02:16 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication