The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Which Evolution Autopilot to Use to Replace Simrad
03-02-17, 05:55 PM
Post: #1
Which Evolution Autopilot to Use to Replace Simrad
I have a 2006 vintage Simrad AP16 Autopilot with AC20 course computer hooked up to my Raymarine C127 and C120, Raymarine Radar, and Raystar 130 GPS receiver on a Seatalkng network. I want to replace the Simrad autopilot with a Raymarine unit. The Simrad uses a Robertson RPU160 reversing hydraulic steering pump and a Simrad RF300 rudder feedback unit. The RPU160 pump has a capacity of 9.8 ci to 33.5 ci at 12V, max 10 amps. 1) Should I be looking at the EV-200 or EV-400? I've seen some literature that says the EV-200 will work with a Type 2 hydraulic pump and other literature that says it won't. 2) Can I use the Robertson pump with the Raymarine ACU or do I have to replace it with a Raymarine pump? 3) Can I use the Simrad rudder feedback unit or do I need to replace that with the Raymarine rudder feedback module? Thanks for your help.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Which Evolution Autopilot to Use to Replace Simrad - rdlaurrell - 03-02-17 05:55 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)