The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / ST60 Wind Cal Factor

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST60 Wind Cal Factor
03-13-17, 02:53 PM
Post: #1
Kevin Offline
Junior Member
**
 		Posts: 24
Joined: Feb 2016
Reputation: 0
ST60 Wind Cal Factor
Boat has an ST60 Wind Instrument, software version 3.06. The original wind transducer was replaced with the newer style (long stem) transducer.

The owner states that "...there is a calibration factor for the wind speed that needs to be set to 0.70. When I tried to do this the lowest setting was 0.75...so all of the wind information is not correct."

The boat is unstepped inside a building, I was able to connect the transducer at the mast step and get into Dealer Calibration. The wind speed factor is indeed set to 0.75. The ST60 manual gives the range as 0.75 to 1.25.

My question is what SHOULD the wind speed factor be?

I have looked at another boat with an ST60 Wind Inst. but the older style wind transducer and that had the factor set to 0.70.

Thank you
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ST60 Wind Cal Factor - Kevin - 03-13-17 02:53 PM
RE: ST60 Wind Cal Factor - Kevin - 03-23-17, 07:14 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication