The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom MFD with SPX-30 Autopilot controller

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom MFD with SPX-30 Autopilot controller
04-23-17, 07:33 PM (This post was last modified: 06-25-18 10:02 AM by Chuck - Raymarine - Moderator.)
Post: #1
Gbtillman Offline
Junior Member
**
 		Posts: 4
Joined: Jul 2016
Reputation: 0
[CA11] Axiom MFD with SPX-30 Autopilot controller
I am in the process of replacing my 30 year old radar and MFD and am looking at the Axiom MFD and Quantum radar.

I currently have an SPX-30 autopilot controller that is relatively new that I would like to keep in the system. It is currently connected to the Raymarine backbone and integrated with the i50 & i60 Speed/Depth/Wind Value Pack and a Vesper XB-8000 AIS.

Will the Axiom MFD ( E70369-00-NAG AXIOM 12 RV Multi-function Display with RealVisionâ„¢ 3D and Navionics+ Charts ) be compatible with this if connected to the backbone and would it be able to control the Autopilot to steer to a waypoint? All I have seen in the literature discusses controlling the new Evolution controllers.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Axiom MFD with SPX-30 Autopilot controller - Gbtillman - 04-23-17 07:33 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication