HS5 Problem or Not?

[knuckelbuster1]

I have an E120 MFD with a DSM 300 linked via SeaTalk HS cable. I also have a back bone setup for my laptop connection and GPS to VHF via a E85001 box.

I am hooking into this system a SR150 Siris Weather module. I bought a HS5 network switch and several RayNet(F) to RJ45(M) cables(A80151).
I put the A80151 into the DSM then to the HS5. I have the HS5 connected to MFD with another A80151. I used a RayNet to RayNet cable connector from the Sirius module to the HS5. I have power indications to both the HS5 and Sirius
I have neither depth data nor communication with the Sirius.

The power indicator light on HS5 is a red and a LED (green) on the connection for the Sirius. No LED light on the DSM connection.
DSM’s status LED blinks green.

What am I missing to get my system functioning?

I swapped out the HS5 today per my communication to Raymarine Tech service.

Thanks John