Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Transducer Problem?
06-28-17, 03:59 PM (This post was last modified: 06-29-17 08:32 AM by Chuck - Raymarine - Moderator.)
Post: #10
RE: Transducer Problem?
I moved the xducer to between the strake and the anti-porpoising angle piece, had it level with the hull bottom, above the hull, below the hull, tilted up and down in each location. the best i've gotten is depth readings at between 20 and 25 mph, and that is not very repeatable. I was advised by the merchant where i purchased it to move it outside the last strake to the right of the anti-p angle; i did that and had similar results at each height i tried.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] Transducer Problem? - bonzoid - 06-12-17, 07:03 PM
RE: Transducer Problem? - bonzoid - 06-15-17, 05:53 PM
RE: Transducer Problem? - bonzoid - 06-18-17, 09:33 AM
RE: Transducer Problem? - joe-al - 06-28-17 03:59 PM
RE: Transducer Problem? - bonzoid - 07-11-17, 06:53 PM
RE: Transducer Problem? - joe-al - 06-23-17, 11:41 AM
RE: Transducer Problem? - SteveME - 06-28-17, 04:38 AM
RE: Transducer Problem? - joe-al - 08-19-17, 01:28 PM
RE: Transducer Problem? - joe-al - 01-28-18, 09:03 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us