The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Product Selection Assistance v / A80489 Adaptor Cable Issue?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
A80489 Adaptor Cable Issue?
06-14-17, 06:06 AM (This post was last modified: 06-14-17 03:18 PM by Chuck - Raymarine - Moderator.)
Post: #1
wavedweller Offline
Junior Member
**
 		Posts: 21
Joined: Apr 2017
Reputation: 0
A80489 Adaptor Cable Issue?
I installed the Raymarine system that you helped my configure as defined by this thread: http://forum.raymarine.com/showthread.php?tid=2945 Everything has worked perfectly since the install a month ago.

During the configuration I decided to use the A80489 Adaptor Cable to connect to my existing DSM 300 w/B744V through-hull sonar transducer so that I could save the pull out of my 40' trawler. I plan change to the newest through-hull transducer on my next pull out. for the last month I have not had depth, speed or sonar so I eagerly awaited the release of the A80489 Adaptor Cable.

A few days ago I installed the cable. It installed easily between the 25 pin Axiom 9 RV 25 pin Transducer receptacle and the 8 pin Airmar (CP370 style connector) transducer cable. Note: I did the latest update to Lighthouse software version 3.0.66 at the same time (see attached photo).
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
A80489 Adaptor Cable Issue? - wavedweller - 06-14-17 06:06 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication