Yanmar 4JH80 Engine Data to E-Series Classic MFDs

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

Yanmar 4JH80 Engine Data to E-Series Classic MFDs

06-22-17, 12:58 PM

Post: #4

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: Yanmar 4JH80 Engine Data to E-Series Classic MFDs

Wil,

Q1. Can I leave the E80/E120 directly connected to each other via the HS ports and connect one of them to the SeaTalkng backbone along with the ECI-100?

A1. Yes. Per my initial response, the SeaTalk2/NMEA 2000 port of the Data Master MFD may be connected to the backbone's spur socket by using the A06061 E-Series Classic MFD to SeaTalkng Adaptor Cable.

« Next Oldest | Next Newest »

Messages In This Thread

Yanmar 4JH80 Engine Data to E-Series Classic MFDs - rsqunit - 06-22-17, 12:49 AM

RE: Yanmar 4JH80 Engine Data to E-Series Classic MFDs - Chuck - Raymarine - Moderator - 06-22-17, 09:40 AM

RE: Yanmar 4JH80 Engine Data to E-Series Classic MFDs - rsqunit - 06-22-17, 11:13 AM

RE: Yanmar 4JH80 Engine Data to E-Series Classic MFDs - Chuck - Raymarine - Moderator - 06-22-17 12:58 PM

RE: Yanmar 4JH80 Engine Data to E-Series Classic MFDs - rsqunit - 07-05-17, 08:44 AM

RE: Yanmar 4JH80 Engine Data to E-Series Classic MFDs - Chuck - Raymarine - Moderator - 07-05-17, 08:56 AM

User(s) browsing this thread: 1 Guest(s)