Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] New System
10-26-17, 11:08 AM (This post was last modified: 10-26-17 11:14 AM by Chuck - Raymarine - Moderator.)
Post: #20
RE: New System
Eric,

Should a system feature at least one Axiom or Axiom Pro MFD having RV circuitry and that MFD be interfaced to a RV transducer or RV transducer pair, then any other Axiom MFDs which have been interfaced to the system via Ethernet communications will also have access to the RealVision 3D features supported by the Axiom or Axiom Pro MFD having RV circuitry. Like a/c/e/eS/gS-Series MFDs which preceded the Axiom MFDs, when interfaced via Ethernet communications, the Axiom MFDs are designed to share all system resources except for NTSC/PAL video sources (ex. CAM50, CAM100, etc.).

The Axiom and Axiom Pro MFDs share the same cartography requirements of the a/c/e/eS/gS-Series MFDs running LightHouse II software. Accordingly the chart card use previously with an a/c/e/eS/gS-Series MFD may be retained for use with and Axiom or Axiom Pro MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] New System - West32 - 09-11-17, 10:15 AM
RE: New System - West32 - 09-12-17, 09:03 PM
RE: New System - West32 - 10-02-17, 08:15 PM
RE: New System - West32 - 09-13-17, 11:02 AM
RE: New System - West32 - 10-12-17, 05:26 PM
RE: New System - West32 - 10-14-17, 08:02 AM
RE: New System - West32 - 10-15-17, 10:05 AM
RE: New System - West32 - 10-17-17, 03:39 PM
RE: New System - West32 - 10-25-17, 01:16 PM
RE: New System - West32 - 10-26-17, 10:56 AM
RE: New System - Chuck - Raymarine - Moderator - 10-26-17 11:08 AM
RE: New System - West32 - 11-02-17, 11:32 AM
RE: New System - West32 - 11-12-17, 08:28 AM
RE: New System - West32 - 01-04-18, 10:30 PM
RE: [CA] New System - West32 - 01-21-18, 08:29 AM
RE: [CA] New System - West32 - 01-23-18, 01:41 PM
RE: [CA] New System - West32 - 02-15-18, 09:14 AM
RE: [CA] New System - West32 - 03-11-18, 08:23 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)