Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] ST6001 Calibration Issues

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST6001 Calibration Issues
12-01-17, 10:11 AM (This post was last modified: 05-24-19 07:40 AM by Chuck - Raymarine - Moderator.)
Post: #12
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] ST6001 Calibration Issues
Trent,

Given the testing and results specified, the problem indeed appears to be rooted within the autopilot's course computer. The ST6001 is compatible with a number of retired autopilot course computers. However, the model of course computer is based upon the model of autopilot drive unit which is installed onboard the vessel. If supplied with this information or with the autopilot drive unit's part number, then we may be able to identify which retired autopilot course computers may be mated to it?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: ST6001 Calibration Issues - tpburt - 11-16-17, 03:18 PM
RE: [CA11] ST6001 Calibration Issues - Chuck - Raymarine - Moderator - 12-01-17 10:11 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication