Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Changing boat name on AIS
12-04-17, 07:52 AM
Post: #4
RE: Changing boat name on AIS
Within the US, the FCC prohibits end users lacking FCC certifications from entering or erasing MMSIs within AIS transceivers. MMSI entry / erasure must be performed by a Raymarine Dealer, a Certified Raymarine Installer, or Raymarine's Product Repair Center.
While it is possible for an end user to modify the static data (to include boat name) within an AIS transceiver by using the ProAIS2 software, MMSIs are issued to individuals ... not to the boat. Accordingly, all of the emergency contact information, owner information, etc. logged with BoatUS or the FCC will be that of the AIS transceivers's original owner.
Should an AIS transceiver be transferred to another individual, then the owner must apply for a new MMSI via BoatUS (if the boat will remain in US waters) or the FCC (if the boat will travel outside of US waters). The AIS transceiver's MMSI must then be erased and new MMSI entered via one of the above listed options, no matter how inconvenient it may be.
Find all posts by this user
Thread Closed 


Messages In This Thread
Changing boat name on AIS - smatson - 11-30-17, 10:56 AM
RE: Changing boat name on AIS - smatson - 12-01-17, 08:56 PM
RE: Changing boat name on AIS - Derek - Raymarine - Moderator - 12-04-17 07:52 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)