Raymarine forum / Raymarine Forums / Multifunction Displays v / COG Vector C Series MFD

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
COG Vector C Series MFD
12-04-17, 04:55 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: COG Vector C Series MFD
Welcome to the Raymarine Forum Florence,

Please click here to view a FAQ addressing this subject. Should the heading source if any be good, and should the MFD be a C-Series Classic MFD (C70, C80, C120), then I suspect that the problem is rooted within the SeaTalk to SeaTalkng Converter ... i.e. it has old software within it. Unfortunately, the C-Series Classic MFDs can neither detect the version of software which is currently installed within the SeaTalk to SeaTalkng Converter, nor can it update the software within the SeaTalk to SeaTalkng Converter. Please click here to view a FAQ addressing alternative means to check/update the SeaTalk to SeaTalkng Converter's software.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
COG Vector C Series MFD - Florence - 12-04-17, 03:04 PM
RE: COG Vector C Series MFD - Chuck - Raymarine - Moderator - 12-04-17 04:55 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication