The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / (DG) E12091 with C90W

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) E12091 with C90W
12-16-17, 02:06 PM (This post was last modified: 12-18-17 08:41 AM by Derek - Raymarine - Moderator.)
Post: #1
Greggegner@gmail.com Offline
Junior Member
**
 		Posts: 4
Joined: May 2016
Reputation: 0
(DG) E12091 with C90W
My question is will a E12091 autopilot control unit (with correct compass and rudder sensors) work with a type 1 Octopus hydraulic pump (10A max). Communication and control will be using Seatalk 1 with ST60 instruments connected to a Seatalk 1 to NMEA 2000 SeatalkNG bridge (works with ST60s now). The NMEA 2000 is connected to C90W. I want to use the C90W as the sole control head for the autopilot. Please advise if I can calibrate and control the E12091.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
(DG) E12091 with C90W - Greggegner@gmail.com - 12-16-17 02:06 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication