[CA] Axiom issues

[MSEPA]

I recently had my dealer upgrade from my old RL80C units to 5 Axiom units. We left the old transducer in place (was feeding the L1250 fishfinder) and used the Raymarine adapter cable (RV to CP370) to feed the Axiom RV unit. We also installed a Super HD radar and all units are networked via 2 HS switches and a ST backbone.

The following issues are existing:
1) Depth readings are fine but there is no temp display (it was there on the L1250). I tried all of the possible transducer choices but no change. I do not know the model of the transducer.

2) I am using the C-Map 4D card and cannot access tide info. The Axiom manual states that tide info is available on Navionics charts. The C-Map card provides tide info so I find it difficult to believe that the Axiom would not display the info. Could this be available on a future LH 3 update? I am using the latest update.

3) Bird mode appears as a settings choice in the radar app but it cannot be selected.

4) I would like to keep in use my existing Raymarine analog cameras but place them on the new network. Your forum states that the Axis M70 series encoders can be used.
The research I have done on this states that the M7014 (4 channel) provides one IP address but 4 video streams. If I use this encoder will I be able to select which camera feed I want to see through my Axiom MFDs. The subject is a bit confusing.

Thank you in advance for your assistance.
Marc