[CA] Axiom Pro Transducer and Chart Considerations

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] Axiom Pro Transducer and Chart Considerations

01-04-18, 02:00 PM

Post: #5

jwasko Offline

Junior Member

Posts: 30
Joined: Dec 2017
Reputation: 1

RE: [CA] Axiom Pro Transducer and Chart Considerations

Thank you Chuck
I checked with some of the local dealers and they indicated they can special order the A80496 adapter.

I am still a bit confused however since there is no mention of this cable in the Axiom Pro Installation manual, 87319v3, although many other adapters are listed. Which connector does this adapter mate with?

I also noted FAQ 3066 stating that the DSM30 is not compatible with the Axiom MFD's. Is this also true for the Axiom Pro's?

Is the CP370 compatible with the Axiom Pro?

« Next Oldest | Next Newest »

Messages In This Thread

[CA] Axiom Pro Transducer and Chart Considerations - jwasko - 12-31-17, 12:56 PM

RE: [CA] Axiom Pro Transducer and Chart Considerations - Chuck - Raymarine - Moderator - 01-02-18, 04:01 PM

RE: [CA] Axiom Pro Transducer and Chart Considerations - jwasko - 01-02-18, 11:11 PM

RE: [CA] Axiom Pro Transducer and Chart Considerations - Chuck - Raymarine - Moderator - 01-03-18, 08:48 AM

RE: [CA] Axiom Pro Transducer and Chart Considerations - jwasko - 01-04-18 02:00 PM

RE: [CA] Axiom Pro Transducer and Chart Considerations - Chuck - Raymarine - Moderator - 01-05-18, 09:46 AM

User(s) browsing this thread: 1 Guest(s)