The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / [TG] DSM operation out of the water

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] DSM operation out of the water
01-08-18, 02:37 PM (This post was last modified: 01-08-18 09:58 PM by Tom - Raymarine - Moderator.)
Post: #1
jwasko Offline
Junior Member
**
 		Posts: 30
Joined: Dec 2017
Reputation: 1
[TG] DSM operation out of the water
My boat has 2 C140W's and a DSM30 networked via a SeatalkHS 8 port switch. I have been experiencing spurious Connection Lost messages from the DSM. The boat is new to me so I don't know the trouble history or software levels. I would like to troubleshoot per FAQ 90 but the boat is now out of the water for the winter.

Is it safe to operate the fishfinder out of the water with the transducer powered? Alternately, can the unit be operated with the transducer disconnected in order to determine the software levels and troubleshoot the power/network connections?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG] DSM operation out of the water - jwasko - 01-08-18 02:37 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication