The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / Backbone Power via ACU-400

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Backbone Power via ACU-400
01-18-18, 03:43 PM
Post: #1
rsqunit Offline
Junior Member
**
 		Posts: 37
Joined: Apr 2017
Reputation: 1
Backbone Power via ACU-400
I just finished my installation (see diagram attached) and per documentation recommendation and advice on this forum, I powered the backbone from the ACU-400.

After a bit of testing the backbone lost power and I figured out the SeaTalkng power fuse on the ACU-400 was blown.

Turns out this is a 3A fuse, but all the SeaTalk docs talk about 5A fuses.

Is the ACU-400 not sufficient for this purpose? As you can see the backbone is balanced and I followed all other recommendations.

Maybe it was just a fluke, but I figured I should ask to make sure before I take the boat out!


Attached File(s)
.pdf  Simplicity Raymarine Network - 2018-01-12.pdf (Size: 947.89 KB / Downloads: 541)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Backbone Power via ACU-400 - rsqunit - 01-18-18 03:43 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication