Raymarine forum / Raymarine Forums / Autopilots v / (DG) Installation instructions for the SmartController

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) Installation instructions for the SmartController
05-08-18, 07:26 AM
Post: #6
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: (DG) Installation instructions for the SmartController
HI Barry,

The DIO interface is not needed in your installation, it is only used when the boat has the Beneteau assisted Docking installed.

The Seatalk from the base station is connected to the STng Spur cable with the Yellow plug on the end , Red to red, Yellow to Yellow and Black to Shield ( or screen as it is sometimes called)

Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: (DG) Installation instructions for the SmartController - Derek - Raymarine - Moderator - 05-08-18 07:26 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication